Centrifugal Pumps
Centrifugal Pumps
CENTRIFUGAL PUMP
| Flow Rate | Up to 6000 L/min (360 m³/hr) |
| Dynamic Head | Up to 95 m |
| Pump Standard | Manufactured to EN 733 – DIN 24255 Standards |
Pump Installation & Applications
- Recommended for clean water and fluids that are not chemically aggressive to the pump components.
- Suitable for civil, industrial and agricultural applications.
- Designed for heavy-duty operation with excellent reliability and durability.
- Dimensions and port positions comply with EN 733 – DIN 24255 Standards.
- Back pull-out design allows maintenance without disconnecting the pump body from the pipeline.
Performance Features
- Wide range of models for different applications.
- High operating efficiency with reduced running costs.
- Long stable characteristic curves.
- High performance across most of the operating curve.
- Flat absorption curves to prevent motor overloading.
- Excellent suction capacity at both low and high delivery rates.
- Curve tolerance according to ISO 2548.
Structural Characteristics
| Pump Body | Cast Iron manufactured to EN 733, DIN 24255 & UNI 7467-NF E-44-111 Standards with flanged suction and delivery ports. |
| Back Plate / Motor Bracket | Cast Iron incorporating the mechanical seal housing. |
| Impeller | Brass centrifugal radial flow type (Cast Iron on 50/250 and above). |
| Motor Shaft | AISI 316 Stainless Steel. |
| Mechanical Seal | Ceramic and Graphite. |
| Motor | High efficiency PEDROLLO induction motor, quiet running, totally enclosed, externally ventilated and suitable for continuous duty. |
| Insulation | Class F. |
| Protection | IP55. |
| Safety Standards | Complies with EN 60335-1, IEC 335-1, CEI 61-150, EN 60034-1, IEC 34-1 and CEI 2-3. |
Contact Us
Related Products
